XenServer
Jump to navigation
Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
Procedures
Network Card Addition (Physical)
XenServer isn't plug and play, once the new network interface has been physically installed, follow the steps below...
- On the XenServer, go into the Local Command Shell
- List the detected physical NIC's
xe pif-list
- Assuming the new NIC wasn't displayed, find the XenServers UUID and then rescan
xe host-listxe pif-scan host-uuid=<uuid>
- Introduce the additional NIC so that it can be seen from XenCentre, and find the new interface's MAC address
ifconfig -a
- Introduce the new physical NIC to the XenServer
xe pif-introduce host-uuid=<uuid> device=<int> mac=<mac>
- Plug the new interface UUID
xe pif-plug uuid=<uuid>
- Confirm new NIC is now listed and is currently attached
xe pif-list