Vyatta: Difference between revisions
Jump to navigation
Jump to search
(Initial creation) |
(No difference)
|
Revision as of 08:36, 25 November 2009
Set-up
- Download the LiveOS ISO
- Create Red Hat RHEL5 (32 bit) VM with
- 2GB hard drive
- 2x E1000 NIC
- 128MB RAM
- Connect ISO and allow to boot fully
- Login as
root / vyatta
- To install to local disk, run the install script with the following command
install-system
- Accept all defaults
- Reboot and disconnect ISO
- Login and run following commands to set IP
configure
set interfaces ethernet eth0 address 192.168.1.10/24
commit
exit