Ubuntu: Difference between revisions
Jump to navigation
Jump to search
m (Added "Change IP Address") |
(Initial creation) |
||
| Line 1: | Line 1: | ||
== Change IP Address == | == Initial Setup == | ||
Much of this section is ''borrowed'' from http://www.howtoforge.com/perfect-server-ubuntu8.04-lts, its well worth a read! | |||
=== Enable Root === | |||
* Use the command <code> sudo passwd root </code> | |||
* Enter a strong password when requested | |||
=== Change IP Address === | |||
* Edit the <code> /etc/network/interfaces </code> file in the following fashion | * Edit the <code> /etc/network/interfaces </code> file in the following fashion | ||
| Line 12: | Line 18: | ||
gateway 192.168.1.1 | gateway 192.168.1.1 | ||
</pre> | </pre> | ||
* Then check the DNS config file | * Then check the DNS config file <code> /etc/resolv.conf </code>, so that the IP v4 part looks like... | ||
<pre> | |||
127.0.0.1 localhost | |||
192.168.10.210 mail.home.int mail | |||
</pre> | |||
* Then restart networking | * Then restart networking | ||
** <code> sudo /etc/init.d/networking restart </code> | ** <code> sudo /etc/init.d/networking restart </code> | ||
=== Update the OS === | |||
* Run the following command to update the apt package database | |||
** <code> apt-get update </code> | |||
* To install any updates | |||
** <code> apt-get upgrade </code> | |||
== Zimba Install == | |||
Reference http://wiki.zimbra.com/index.php?title=Ubuntu_8.04_LTS_Server_%28Hardy_Heron%29_Install_Guide | |||
# Copy the install to the server | |||
#* EG <code> pscp C:\Users\Simon\Downloads\zcs-6.0.5_GA_2213.UBUNTU8.20100202225756.tgz simons@mail:zcs-6.0.5_GA_2213.UBUNTU8.20100202225756.tgz </code> | |||
# Uncompress the package | |||
#* <code> tar -xzf zcs-6.0.5_GA_2213.UBUNTU8.20100202225756.tgz </code> | |||
# Start the install | |||
#* <code> ./install.sh </code> | |||
#* The install ''will'' fail due to missing packages! | |||
# Install the missing prerequisite packages | |||
#* EG <code> apt-get install libpcre3 libgmp3c2 libstdc++5 sysstat </code> | |||
# Restart the install | |||
Revision as of 00:53, 19 February 2010
Initial Setup
Much of this section is borrowed from http://www.howtoforge.com/perfect-server-ubuntu8.04-lts, its well worth a read!
Enable Root
- Use the command
sudo passwd root - Enter a strong password when requested
Change IP Address
- Edit the
/etc/network/interfacesfile in the following fashion
# The primary network interface
auto eth0
iface eth0 inet static
address 192.168.1.150
netmask 255.255.255.0
network 192.168.1.1
broadcast 192.168.1.255
gateway 192.168.1.1
- Then check the DNS config file
/etc/resolv.conf, so that the IP v4 part looks like...
127.0.0.1 localhost 192.168.10.210 mail.home.int mail
- Then restart networking
sudo /etc/init.d/networking restart
Update the OS
- Run the following command to update the apt package database
apt-get update
- To install any updates
apt-get upgrade
Zimba Install
Reference http://wiki.zimbra.com/index.php?title=Ubuntu_8.04_LTS_Server_%28Hardy_Heron%29_Install_Guide
- Copy the install to the server
- EG
pscp C:\Users\Simon\Downloads\zcs-6.0.5_GA_2213.UBUNTU8.20100202225756.tgz simons@mail:zcs-6.0.5_GA_2213.UBUNTU8.20100202225756.tgz
- EG
- Uncompress the package
tar -xzf zcs-6.0.5_GA_2213.UBUNTU8.20100202225756.tgz
- Start the install
./install.sh- The install will fail due to missing packages!
- Install the missing prerequisite packages
- EG
apt-get install libpcre3 libgmp3c2 libstdc++5 sysstat
- EG
- Restart the install