VCP5

From vwiki
Revision as of 11:36, 19 January 2012 by Sstrutt (talk | contribs) (→‎Create and Deploy Virtual Machines: Added VM hw version)
Jump to navigation Jump to search

This page shows my crib notes created into to obtain the VCP5 certification. I've been using the technology for a while now, and I've only bothered to document the gaps in my own knowledge, so it is by no means concise and unlikely to cover much that would also apply to previous certs. VMware's What's New course covers the following...

  • List and describe key enhancements in vSphere 5.0
  • Upgrade a deployment from vSphere 4.x to vSphere 5.0
  • Use Image Builder to modify and export an image profile as part of Auto Deploy
  • Use Auto Deploy to Install a stateless ESXi host
  • Manage a version 8 virtual machine with the next-generation Web-based VMware vSphere Client
  • List and describe key networking enhancements, including the ESXi firewall and new features in vNetwork distributed switches
  • Upgrade and manage a VMware vSphere VMFS5 datastore
  • Understand and configure policy-driven storage management
  • Create a datastore cluster and configure Storage DRS
  • Configure a VMware High Availability cluster based on the new Fault Domain Manager agents
  • Use the Linux-based VMware vCenter Server Appliance

Plan, Install, Configure and Upgrade vCenter Server and VMware ESXi

Install and Configure vCenter Server

vCentre Server Appliance

  • Deployed via OVF, requires 7 GB disk (max 80 GB)
  • Supports up to 5 ESXs / 50 VMs with embedded db

vCentre Server Components

  • Web Client (Server)
  • Update Manager - requires 32-bit DSN db
  • ESXi Dump Collector - requires IPv4
  • Syslog Collector - requires IPv4
  • Auto Deploy - deploys ESXi image direct to ESX memory
  • Authentication Proxy - allows ESXi servers to join AD domain

vCentre Availability

  • Must match any requirements to support Auto Deploy
  • Must run on ESXi's not supported by Auto Deploy

Client version use cases

  • vSphere Client - Primary vSphere management tool (for infrastructure sys admins)
  • vSphere Web Client - Primarily intended for inventory display, and VM deployment/configuration (for infrastructure mgrs and consumers)

Install and Configure VMware ESXi

vSphere Auto Deploy Image Builder

  • Creates ESXi images in VIB packages

Auto Deploy rules

  • Rules identify an ESX by...
    • boot MAC (as seen in PXE boot)
    • SMBIOS info
    • BIOS UUID
    • Vendor / Model
    • Fixed DHCP IP address
  • Active Rule Set - used to match ESXs at boot time
  • Working Rule Set - used test compliance prior to adding to rule to Active Rule Set

On an ESX's 1st boot

  1. ESX boots, gets IP from DHCP server
  2. ESX downloads and runs gPXE from TFTP server
  3. gPXE gets image from Auto-Deploy server over HTTP
  4. ESX boots image and registers with VC that the Auto Deploy server is registered with
  5. If Host Profile requires user entry, ESX will boot into Maintenance Mode
  6. If ESX is part of DRS cluster, ESX may receive VM's as soon as online

Memory Compression Cache

  • Mem.MemZipEnable - set to 0 to disable
  • Mem.MemZipMaxPct - changes %age of VM memory allowed to be compressed (default is 10%)

Plan and Perform Upgrades of vCenter Server and VMware ESXi

ESX

  • ESX's can be upgraded via (ESX will retain MS-DOS based partitioning)
    • Update Manager
    • ISO installer
    • Script
  • Or installed fresh via (ESX will use GUID partition tables)
    • esxcli
    • Auto Deploy (not an upgrade, ESX is re-provisioned from scratch)
    • ISO installer

VMFS

  • v3 -> v5 Upgrade...
    • Requires exclusive access to datastore
    • Original block size is retained

Secure vCenter Server and ESXi

Role Type ESX / VC Description
No Access System ESX & VC No view or do. Can be used to stop permissions propagating.
Read Only System ESX & VC View all except Console, no do.
Administrator System ESX & VC Full rights
VM User Sample VC only VM start/stop, console, insert media (CD)
VM Power User Sample VC only As user plus hardware and snapshot operations
Resource Pool Admin Sample VC Only Akin to an OU admin, full rights for child objects

Cannot create new VM's without additional VM and datastore privileges.

Datastore Consumer Sample VC Only Allows creation of VMDK's or snapshots in datastore (additional VM privileges to action)
Network Consumer Sample VC Only Allows assignment of VM's to networks (additional VM privileges to action)

vCentre Access

  • Disabled logged in users use access as next validation period (default is 24hrs)

ESXi Firewall

  • New for v5
  • Rule set XML files found in /etc/vmware/firewall/
  • Should be edited via GUI

ESXi and Active Directory

  • ESX FQDN must match AD domain
  • ESX and AD should be synced to same time
  • ESX's DNS must be able to resolve the AD domain
  • Add to OU container using domain name format
    • sandfordit.local/SiliconOU1/MondeoOU2

Identify vSphere Architecture and Solutions

vSphere Editions

Edition vRAM vCPU/VM Features
Essentials 32 GB 8 vCPU Max 3 ESX's with 2 CPUs each, managed by vCentre for Essentials
Essentials Plus 32 GB 8 vCPU + HA, Data Recovery, vMotion
Standard 32 GB 8 vCPU HA, Data Recovery, vMotion
Enterprise 64 GB 8 vCPU + DRS, DPM, SvMotion, FT, Hot Add, vShield
Enterprise Plus 96 GB 32 vCPU + dvSwitch, IO Control, Host Profiles, Auto-Deploy, sDRS
Desktop n/a ?? VDI only

Plan and Configure vSphere Networking

Configure vNetwork Standard Switches

  • vSS - vNetwork Standard Switch (vSwitch)

Configure vNetwork Distributed Switches

  • vDS - vNetwork Distributed Switch (dvSwitch)

Configure vSS and vDS Policies

  • TCP Segmentation Offload - Replace VM's NIC with Enhanced vmxnet
  • NetFlow is available for dvSwitch (vDS requires its own IP address)

Plan and Configure vSphere Storage

Configure Shared Storage for vSphere

iSCSI Adapters

  • Software Adapter - ESX software implementation using VMkernel
  • Dependant Hardware Adapter - Standard NIC with iSCSI offload functionality, reliant on ESX's networking
  • Independent Hardware Adapter - Full iSCSI card, not reliant on ESX networking

Boot from software iSCSI now supported. If disabled, adapter re-enables for boot.

Configure the Storage Virtual Appliance for vSphere

Allows 2 or 3 ESX's local storage to pooled together into a virtual datastore

  • VSA - vSphere Storage Appliance - deployed to each ESX providing storage to VSA cluster
    • Cannot be deployed to ESX that also host vCentre
    • Has 3 IP addresses (mgmt, datastore, backend/replication)
  • ESX
    • Must have static IP on same subnet as vCentre
  • Disks
    • 2, 4 or 8 identical disks (same model & capacity, JBOD not supported)
    • Must be in RAID10 on ESX, then RAID1'ed by VSA to another ESX
  • VMs
    • Cannot running on ESX prior to VSA cluster creation
    • Running on VSA datastores cannot swap memory, use memory reservations

Create and Configure VMFS and NFS Datastores

VMFS5

  • Supports > 2TB per extent, max 64 TB datastore size
  • Supports > 2TB RDM
  • 1 MB block size
  • Uses hardware assisted ATS (Atomic Test and Set) locking where available
    • Instead of SCSI reservations, locks disk sector rather than whole disk

VMFS3 -> VMFS5 Upgrade

  • VM downtime not required

Deploy and Administer Virtual Machines and vApps

Create and Deploy Virtual Machines

VM hardware version in now v8, but may be v7 if

  • VM migrated from ESX v4
  • Use a virtual disk created on ESX v4 in a VM

Create and Deploy vApps

Manage Virtual Machine Clones and Templates

Administer Virtual Machines and vApps

Establish and Maintain Service Levels

Create and Configure VMware Clusters

High Availability Now uses Fault Domain Manager (FDM) agent rather than AAM

  • 1 master host, remaining ESX's are all slaves
  • Uses both network and datastore heartbeating as a fallback should network isolation occur
  • Reliant on vCentre for reconfiguration (only)
  • Communication by IP (not DNS!)
  • Logs to standard syslog

In the case of network problems an ESX will be either of;

  • Isolated ESX - No mgmt network connectivity to any other ESXs in cluster
  • Partitioned ESX - Lost connectivity to master, but can see other ESX's
    • One ESX in partition will be elected as master

Plan and Implement VMware Fault Tolerance

Unsupported

  • Snapshots
    • Therefore also Storage vMotion, VM backups, and Linked Clones
  • SMP - Only single vCPU supported
  • Physical RDM (virtual OK)
  • Thin disks (must be eager-zeroed/support cluster features)
  • NPIV
  • IP v6
  • NIC Passthrough
  • Hot-plug devices
  • Paravirtualised guests
  • CD-ROM attached ISO not on shared storage

DRS

  • EVC must be enabled
    • VM's can be hosted, but won't be automated by DRS in non-EVC cluster
  • Max 4 FT VMs per ESX
    • Override via das.maxftvmsperhost

Create and Administer Resource Pools

Migrate Virtual Machines

Backup and Restore Virtual Machines

Patch and Update ESXi and Virtual Machines

Perform Basic Troubleshooting

Perform Basic Troubleshooting for ESXi Hosts

Perform Basic vSphere Network Troubleshooting

Perform Basic vSphere Storage Troubleshooting

Perform Basic Troubleshooting for HA/DRS Clusters and vMotion/Storage vMotion

Monitor a vSphere Implementation and Manage vCenter Server Alarms

Monitor ESXi, vCenter Server and Virtual Machines

Create and Administer vCenter Server Alarms