Virtual Centre

From vwiki
Revision as of 20:12, 7 April 2010 by Sstrutt (talk | contribs) (Extra note)
Jump to navigation Jump to search

Yes, I know, it should be Virtual Center (or as its now known vCenter) not Centre, but in English centre is spelt that way and that's the language we're using here, not a localised dialect. Any complaints, speak to the [Queen], its her language.

Install

For a production installation you should have an SQL database server (MS or Oracle) to use.

  1. Start the installer
  2. Accept EULA, and then click Next
  3. Enter vCentre license key (if you have one), and then click Next
  4. Setup a database to use, and then click Next
    • Use MS SQL 2005 Express option for small scale or non-production deployments only
    • Select an existing DSN (to set-up a new DSN, see #Create DSN)
  5. Enter the appropriate authentication information, and then click Next
  6. Select the appropriate Linked Mode (this proc assumes Standalone), and then click Next
  7. Accept the default TCP ports (its recommended that you don't share the server with other services which, for example) might necessitate changing the vCentre ports), and then click Next
  8. Click Install


Create DSN

Use this procedure to create a new SQL DSN on the server on which you are installing vCentre, if your database is Oracle rather than Microsoft then you'll need to install an Oracle db driver 1st and select that rather than the SQL Native Client in this procedure. A blank/empty database should be create on the database server prior to carrying out this procedure.

  1. Go to Data Sources (ODBC) in the Administrative Tools menu
  2. Go to the System DSN tab and click on Add...
  3. Select the SQL Native Client driver and click Finish
  4. Enter the required options described below, and then select Next...
    • Name: This is the name that you'll know the DSN by, and use in the vCentre setup, eg VC
    • Description: Optional description for DSN, eg vCentre database
    • Server: Database server hostname, eg db1.company.com
  5. Enter the appropriate authentication options for your database (ask your DBA if in doubt!), and then click Next
  6. Check the Change the default database to option and select the appropriate database (that's been created on the database server, then click Next
  7. Leave default options as is on final screen, and click Finish
  8. Click the Test Data Source... button to test connectivity to the database, then OK to finish
    • If the test fails, recheck your config, and also test connectivity to the database server (ping, telnet porttest etc)

General Configuration

Sysprep Setup

The following Sysprep support directories were created during Virtual Center installation, these need to be populated in order for the VC to be able to sysprep VM's as they are deployed using Guest Customisation:

<ALLUSERSPROFILE>\Application Data\Vmware\VMware VirtualCenter\sysprep
...\1.1\
...\2k\
...\xp\
...\svr2003\
...\xp-64\
...\svr2003-64\

where <ALLUSERSPROFILE> is usually C:\Documents And Settings\All Users\. Windows 2008 (and Vista) don’t need sysprep files as the function is built into the OS.

Download the ‘System Preparation Tool’ or ‘Deployment Tools’ package that contains ‘sysprep’ from the Microsoft download centre. Make sure that you download the correct version for the guest operating system and ‘Service Pack’ that you want to customize.

1.1: In the case of the generic version 1.1 simply run the downloaded executable to extract the files then copy the contents of the Tools directory into the appropriate directory (see below).

Windows 2000: In the case of Windows 2000 simply run the downloaded executable to extract the files into the appropriate directory (see below).

Win XP: In the case of XP run the downloaded executable to create deploy.cab then use something like WinZip to extract the files into the appropriate directory (see below).

Windows 2003: In the case of Windows 2003 the downloaded executable is a Hot Fix which must be run (Installed) on a matching OS to create deploy.cab then use something like WinZip to extract the files into the appropriate directory (see below).


TomCat Memory Throttle

The Tomcat webserver (used to provide VC Web-services), can be very memory hungry (up to 1GB) in comparison to when it ran on VC v2.5 (normally around 50MB). This can be throttled down, though this is only recommended for small, non-production installations (<10 ESX's).

  1. Edit the registry to put a ceiling on the Java VM's memory usage
    1. Append --JvmMx=256 (MB) to end of HKLM\SYSTEM\CurrentControlSet\Services\vctomcat\ImagePath
  2. Restart the service
    1. VMware VirtualCenter Management Webservices


Update Manager

Import updates from another VC

Useful when you've a isolated VC (without internet access), and another with a full compliment of updates.

  1. Copy the updates from to the VC, copy the entire Data directory
    • Default location for updates C:\Documents and Settings\All Users\Application Data\VMware\Vmware Update Manager\Data
  2. On the isolated VC, run a version of the following example command to update the Update Manager database
    • vmware-updateDownloadCli -p <path to patches>\Data -f esx -U <user ac>

Scan/Remediate fails

  • Error: VMware Update Manager had a failure
  • Detail: Patch metadata for <ESX> missing, please download patch metadata first, despite the fact that Update Manager is fully up to date.
  • /var/log/vmware/esxupdate.log shows connection errors
  1. On the VC, stop the VMware Update Manager Service
  2. Edit vci-integrity.xml file
    • Normally found in C:\Program Files\VMware\Infrastructure\Update Manager\
  3. Edit the following entry, adding the VC IP address
  4. Restart the VMware Update Manager Service


SQL Database

Migrate SQL2000 to SQL2005

This should be fairly painless (so long as your DBA knows his stuff!).

Before you start, you must ensure the Virtual Centre is using a SQL Native Client driver to access the database (see VMware KB1003391)...

  1. Open up ODBC Data Source Administrator, and go to the System DSN tab
  2. Check that the driver you're using is SQL Native Client
  3. If not, you'll need to upgrade...
    1. Download from Microsoft and install SQL (see the VMware KB link above)
    2. Stop your Virtual Centre Server service
    3. Rename your existing DSN (eg append "old" to it)
    4. Create a new DSN using the new driver but otherwise exactly the same as the previous (the name MUST be the same)
    5. Restart the Virtual Centre Server service
    6. Login using the VI Client and ensure everything looks good (clusters, ESX's, VM's, Alarms, Guest Customisations etc)

To complete the migration...

  1. Stop the Virtual Centre Server service
  2. Backup the database (and log files) from your old SQL 2000 server
  3. Restore the database (and log files) to your new SQL 2005 server
  4. Ensure that your Virtual Centre's database account is the db_owner of the Virtual Centre database on SQL 2005 (as it was on the SQL2000 database)
  5. Change the ODBC DSN settings on the VC server so it points to the SQL 2005 server (just change the server name, if you need to specify a non-standard TCP port use <SERVER>, <PORT> rather than <SERVER>:<PORT>)
  6. Restart the Virtual Centre Server service
  7. Login using the VI Client and ensure everything looks good (clusters, ESX's, VM's, Alarms, Guest Customisations etc)

SQL Database Maintenance

Summary of maintenance info from http://www.vmware.com/files/pdf/vc_microsoft_sql_server.pdf

Index Fragmentation

This maintenance procedure can be performed inline (ie without stopping the DB or VirtualCenter)

  1. Log into the SQL database using Query Analyser
    1. Run up SQL Query Analyzer, and log into the SQL server
  2. Perform query to check the level of fragmentation (may take 2 mins or so to run). Create and execute the following query;
    • USE DB (replace DB with whatever the database is called
    • GO
    • DBCC SHOWCONTIG (VPX_HIST_STAT,VPXII_HIST_STAT)
    • GO
  3. Check the query results for either of the following bad conditions
    • Scan Density < 90%
    • Logical Scan Fragmentation > 10%
  4. If required, perform defragmentation by running the following query (will take some time depending on level of fragmentation)
    • DBCC INDEXDEFRAG ('DB', 'VPX_HIST_STAT', 'VPXII_HIST_STAT')
    • GO
  5. Reheck the level of fragmentation using the following query (if Logical Scan Fragmentation is still > 30%, then may need to do reindex)
    • DBCC SHOWCONTIG (VPX_HIST_STAT,VPXII_HIST_STAT)
    • GO
  6. Update the statistics to continue providing accurate metrics, use the following query;
    • UPDATE STATISTICS VPX_HIST_STAT WITH FULLSCAN
    • GO

You may occasionally encounter a deadlock issue that causes the INDEXDEFRAG session to terminate. If the session terminates in this way, there is no adverse impact on the database, and the database continues running normally. You can issue the INDEXDEFRAG command again and the operation resumes where it left off.

Index Reindexing

This maintenance procedure can only be performed with the database offline, the VirtualCenter Server Service must be shutdown

  1. Perform query to check the level of fragmentation (may take 2 mins or so to run). Create and execute the following query;
    • USE DB
    • GO
    • DBCC SHOWCONTIG (VPX_HIST_STAT,VPXII_HIST_STAT)
    • GO
  2. Check the query results for either of the following bad conditions
    • Scan Density < 70%
    • Logical Scan Fragmentation > 30%
  3. Stop the VirtualCenter Server Service
  4. Reindex the table by running this query;
    • DBCC DBREINDEX ('VPX_HIST_STAT', , 70)
    • GO
  5. Once complete, restart the VirtualCenter Server Service

Other Tasks

Its also possible to delete old data from the database, this is achieved by running a script against the database, see http://kb.vmware.com/kb/1000125 for further info.

Troubleshooting

VMware VirtualCentre Server service won't start

Service-specific error 2 (0x2)

  • Caused by the SQL service being unavailable, therefore investigate why this is so.

If SQL is running on the same server, and the service failed after a reboot, its likely that its starting too quickly and SQL isn't ready. Either, make the service automatically restart after X mins (good practise anyway), and/or make the service depend on SQL.

To make the VirtualCentre Server service depend on the SQL service

  1. Find the name of the SQL service
    • Find the MSSQL key in the following hive (will probably be MSSQL, MSSQL$SQLEXPRESS, etc)
    • HKLM\System\CurrentControlSet\Services
  2. Make VC service dependant on it
    • Browse to HKLM\System\CurrentControlSet\Services\vpxd
    • Add the name of the SQL service to the DependOnService value (there must be a blank line at the end still)


Virtual Machine won't export

Failed to Export Virtual Appliance: An item with the same key has already been added

  • Caused by VM being exported having a running snapshot.

To resolve

  • Delete / Consolidate VM's snapshot(s)