Cisco IOS Commands: Difference between revisions

From vwiki
Jump to navigation Jump to search
m (Added some commands)
(Added some stuff)
Line 1: Line 1:
== Management Access ==
# SSH to 159.104.225.39, and login using flastname
# Telnet to network device, TACAS login using firstname.lastname
== Qucik Commands ==
{| cellpadding="4" cellspacing="0" border="1"
{| cellpadding="4" cellspacing="0" border="1"
|-
|-
! Command !! Description
! Command !! Description
|-
|-
| <code>show ip int brief</code>     || Show list of interfaces (inc VLAN's etc)
| <code>show ip int brief</code>     || Show list of interfaces (inc VLAN's etc)
|-
|-
| <code>show int status</code>       || Show list of interfaces, label, up/down etcq
| <code>show int status</code>       || Show list of interfaces, label, up/down etcq
|-
|-
| <code>show int gi2/24</code>       || Show interface detail for gi 2/24
| <code>show int gi2/24</code>       || Show interface detail for gi 2/24
|-
|-
| <code>clear counters gi2/24</code> || Clear counters for gi 2/24
| <code>show int gi1/6 switch</code>  || Show siwtchport info gi 1/6
|-
| <code>clear counters gi2/24</code> || Clear counters for gi 2/24
|-
|-
| <code>show mac-address-table <nowiki>|</nowiki> include 70cc </code> || Filter MAC table for addresses containing 70cc
| <code>show mac-address-table <nowiki>|</nowiki> include 70cc </code> || Filter MAC table for addresses containing 70cc
|-
|-
| <code>show cdp neigbours </code> || Show results of CDP discovery (dependant on CDP being enabled!!)
| <code>show cdp neigbours </code>   || Show results of CDP discovery (dependant on CDP being enabled!!)
|}
|}

Revision as of 11:49, 26 October 2009

Management Access

  1. SSH to 159.104.225.39, and login using flastname
  2. Telnet to network device, TACAS login using firstname.lastname

Qucik Commands

Command Description
show ip int brief Show list of interfaces (inc VLAN's etc)
show int status Show list of interfaces, label, up/down etcq
show int gi2/24 Show interface detail for gi 2/24
show int gi1/6 switch Show siwtchport info gi 1/6
clear counters gi2/24 Clear counters for gi 2/24
show mac-address-table | include 70cc Filter MAC table for addresses containing 70cc
show cdp neigbours Show results of CDP discovery (dependant on CDP being enabled!!)